Tuesday, October 31, 2023

Guns for Jews

I've put together a primer on gun ownership for fellow Jewish-Americans who are new to it, in the wake of the October 7th pogrom. It's in the form on an article I'm hosting on my Google Drive.

Guns for Jews.

Please share it to anyone who you think might find it useful.

Friday, October 27, 2023

Tire Changing Tools

Yesterday I had to change a flat tire for the first time in about 20 years.

The last time I had to change a flat was on my 2000 Ford E-150 work van, back in late 2003/early 2004. That sucked.

At about 4:00 PM, my daughter called and told me that she'd hit a curb and that she had a flat. She was down near her college and it took me about 45 minutes to get there.

When I arrived I saw that it was her right front tire and the rim was pretty banged up. I was able to change it using the OEM tire iron and jack from her 2013 Toyota Corolla. The lug nuts were pretty tight so they took a good bit of effort using the tire iron.

I do keep a 4-way lug nut wrench in my Xterra which would have provided more leverage but I didn't need it.

However, the experience got me to thinking that keeping a breaker bar in my truck along with the correct size deep sockets would be a good idea.

So later on today I plan to go over to Harbor Freight and pick up:

The long breaker bar will give me a lot more leverage if needed to remove lug nuts while the socket set should cover any vehicle I need to use it on.

Sort of like having an umbrella with me, I figure having them will also prevent me from needing them frequently. 

Afterwards, I told her that if this happens again to call AAA and see how long the wait will be. That said, it's always good when a dad can rescue his little girl.

(As for why she couldn't change it herself, she's on the small side and there's no way she would have been able to get those lug nuts off the studs.)


Wednesday, October 11, 2023

The M3 "Tanker" Shoulder Holster

Sometime around 1939 - 1940, the US Army adopted a shoulder holster as an option for carrying the M1911A1 pistol. A similar version was adopted during WW2 for the S&W Victory Model and Colt Commando revolvers. These holsters remained in service at least until the 1990s, AFAIK. After the 1911 was replaced with the Beretta M9, it was used for the new pistol.

Several years ago I picked up a copy of the USGI M3 shoulder holster for the S&W Victory Model from the now-defunct Pacific Canvas and Leather. I like it a lot for carrying my Model 15 or Ruger Police Service Six, but of course it's too small for an N-Frame.

I recently replaced the grips on my S&W Model 28-2 Highway Patrolman, which made the gun much easier to shoot with my small hands. It previously wore a set of Herrett's Shooting Stars. I replaced them with a set of Thai Magnas + a BK Grips adapter. With it now fitting me better I started thinking about packing it as a woods gun.

So back on 9/3 I placed and order with El Paso Saddlery for one of their “1942 Tanker” holster, which is their version of the USGI M3 shoulder holster. It arrived 9/15, much sooner than expected based on what the EPS website says.




If it looks backwards it's because I'm a southpaw.

It’s very nicely made with nice leather, stitching, and hardware. They also threw in a key fob.

Out of curiosity I put my Colt Shooting Master in it and except for the fact that it’s too short for a 6” barrel, the holster fits the gun well. So, if I ever pick up a 4” Colt New Service this holster is usable with it.

A S&W Heavy Duty would look right in this rig.

I'm looking forward to using it in the woods.

I also have a copy of the M3 for 1911s. I don't have a 1911 anymore but I do have an M9, so tonight I tried it in the holster.



(I don't recall where I got this one from. Maybe Amazon. I'm pretty sure it was made in India.)

It's very snug and takes quite a bit of force to insert. So, since the leather was dry I gave it a good coat of neatsfoot oil and plan to leave the Beretta in it for several days in the hopes it'll stretch out.

As-is, my Browning High Power and Beretta 81 Cheetah fit OK. The CZ P-09 won't fit at all.

I've recently run across variants of the Tanker holster cut like the leather ones but made from canvas. The Amazon link above has some. I've never tried them and they are a bit less expensive, but I've no experience with them. They might work well, might not.

I also ran across this blog post extolling the merits of the M7 shoulder holster. The M7 differs from the M3 in that it includes a chest strap to help keep it from flopping around. That post also lists a variety of pistols that will fit, which makes it close to being a universal holster.

As to why to use one, as noted above I find it comfortable. It also makes the gun available if you're sitting in a vehicle. The strap can be adjusted so you can wear it over your clothes or concealed under a coat. Also, if you can't normally carry a gun but want one that you can quickly throw on, it's an option.