Quick Strips for .410 Shells

Most revolver shooters are familiar with Bianchi Speed Strips and the similar Tuff Products Quick Strip for carrying spare ammunition. Well, the .44/.45 size Quick Strips also work for .410 shells:

While this takes up more room than the 5-round box, it's easier to handle as a unit especially if you're wearing gloves.

A Rossi .410 Single Shot

A few weeks ago I got to shoot an old H&R folding .410 shotgun that belongs to a friend, and instantly got a bad case of the wants. I offered to buy it from him but he's not selling, and I can't blame him. He owns some property and it would be a perfect piece for taking care of varmints in his garden or to tote while he's walking his land.

So, I got to looking for a .410 break barrel on Gunbroker. I lost an auction for a nearly mint condition Stevens 94 but found a gently used Rossi SS4112811. I picked it up from my FFL a couple days ago and it's in even better shape than described in the listing. It's basically new old stock. The only thing that was missing was the OEM cable lock, which is no loss IMHO. This model is no longer listed on Rossi's website.

The barrel is 28" long with a modified choke, which is preferable for my needs to the full choke most .410s have. I think, anyway. I need to pattern it.

The gun weighs about 3.8 lbs. It feels like a toy but it means that you can carry it all day.

Rossi's method of takedown is good. The forearm is held on by the same screw which the front sling swivel is attached to. It's captured so it can't be lost.

Like the H&R single shots made in the past several decades the Rossi has a transfer bar, allowing it to be safely carried loaded with the hammer down. It also has a manual hammer blocking safety mounted on the left side of the receiver. At first my reaction was to regard this as superflous but it will allow me to hunt with the gun cocked, much as one would with a hammerless double or a pump gun. I'm left handed so the safety is easy to push off with my trigger finger. A righty could use his thumb, but for once this is a gun feature that's actually more southpaw-friendly.

The plastic furniture is hollow, which got me thinking about using it to store emergency supplies. There's plenty of room in the stock to hold a bore snake or maybe a collapsible cleaning rod, and a bottle of oil, or a ziplock bag with some shells. The forearm is hollow with reinforcing ribs. If I cut one out it could hold shells. I may just stash some fire starting gear in it.

Since the 2020 pandemic, .410 ammo has been scarce on gun shop shelves, and most of that seems to oriented for defensive use in Taurus Judge or S&W Governor revolvers. My FFL only had shells loaded with No.9 shot. However, I've been able to find a variety of .410 ammo online in both 2.5" and 3" length, and have acquired several boxes to experiment with, ranging from No.9s to No.4s to buck and slugs.

UPS should be bringing a stock cuff for ammo and a repro M1 Carbine sling today.

I'm also planning to fireform some .303 British empties into all-brass shells, using instructions posted elsewhere by @Outpost75. The gun closes on the .303 cases but it's a little tight so first I'll sand a thou or so off the case heads. I also have a box of Magtech 2.4" brass shells on the way from Ballistic Products along with suitable cards and wads. Next weekend there's a gun show and I'll try to pick up some Lil-Gun and/or H-110/W-296 to reload with. Apparently, 2400 is also good for reloading .410 but lately it's pretty much unobtanium. And I can always use the Holy Black.

I have several 12 and 20 gauge shotguns so this acquisition wasn't a need, but it should be fun to experiment with.