Sunday, August 31, 2008
Gustav Diary
Ridin' Gustav
Hurricane Gustav
Here's NOAA's website tracking Gustav's progress. The current forecast shows it hitting New Orleans.
Finally, ShaneS's Listening to Katrina remains the best website I've seen for showing you how to prepare for disasters, including hurricanes.
Friday, July 18, 2008
Choosing an AR-15
Am thinking about purchasing an AR15 but there are many different
models. Which do you recommend for both home protection and emergency
hunting? I would definitely want one that chambered both .223 and
5.56.
Also what is the best scope for both quick target aquisition and very
precise (1 or 2 inches) shots out to say 150 yards? Would a zoom be
best? Also do they make a good scope that is also night vision?
And this is what I posted in reply:
I recommend going over to AR15.com and perusing the technical forums,
along with the various tech manuals they have onsite.
In general, when looking for an AR15 to be used for defense I regard
the following features as requirements:
1. 5.56mm chamber. This improves reliability and allows you to shoot .
223 or 5.56 spec loads safely.
2. Chrome lined bore and chamber. Improves reliability and makes it
easier to clean.
3. Flat top upper receiver, which greatly simplifies adding optics.
4. Properly staked bolt carrier. Loose carrier keys contribute to
functioning problems.
5. Barrel twist of 1:9 is fine but 1:7 is better, because it will
handle heavier bullets.
6. A lightweight or M4 profile barrel is better than a heavy barrel on
a defensive rifle. HBARs are fine for target shooting but slow you
down for defensive work.
7. No match triggers on serious rifles. They aren't rugged enough.
8. Avoid the temptation to hang all sorts of tacticrap off your rifle.
9. I like having a telescoping stock. Aside from making the rifle
more compact for storage, it enables me to adjust length of pull for
different clothing (e.g., t-shirt vs. winter coat) or different
shooters.
My rifle is a Colt AR-15A3 Tactical Carbine. The one feature I may
change on it is the barrel, it's a 1:9 twist HBAR. I'd prefer a
lightweight 1:7 twist barrel. Based on what I've read by instructors
who see lots of ammo go downrange, Colts tend to be the most reliable
of the major manufacturers. You pay a premium but on a defensive
rifle reliability is the single most important factor.
I've added a DPMS ambidextrous safety because I am left handed.
Unless you are running a suppressor or a short barreled rifle, a gas
piston upper is unnecessary. Learn to properly clean and lube your
rifle and it'll be reliable. (Hint: run it wet.)
For civilian defensive use the best choice for an optic is probably an
Aimpoint, non-magnified red dot. The Aimpoints offer very long
battery life, are very rugged, and fast. I have an IOR Valdada 3x25mm
CQB scope, which offers low magnification (important for me because if
I lose my glasses I'll at least have the scope) and is built like a
tank. I bought the IOR as a less expensive alternative to a Trijicon
ACOG.
I would avoid a zoom optic on a defensive carbine unless the highest
power is 4x. Murphy's Law dictates that when you need to use the
rifle up close the scope will be zoomed to the highest magnification,
which will slow you down. Illuminated reticles are a good, so you can
see them in poor light.
Stick with USGI milspec aluminum magazines or Magpul P-Mags. The
British and Singaporean steel mags are good, too, but may benefit from
replacement springs and/or followrs. HK mags are good but grossly
overpriced. Avoid no-name or USA-brand magazines, which are junk.
Wednesday, July 16, 2008
Site to Check Your Bank's Health
http://www.bankrate.com/brm/safesound/ss_home.asp
Sunday, July 13, 2008
A Potential Bio-Weapons Lab in Iran?
Hundreds of African monkeys are being taken from their natural habitat and sold for scientific experiments, as well to a "secretive" biological laboratory in Iran, London's Sunday Times reported.
In an undercover investigation by the Times, Tanzanian animal trader Nazir Manji said he sells some 4,000 vervet monkeys a year to laboratories all around the world for about $100 each
...
The biological research institute, which has headquarters near Tehran, has been accused in the past by an Iranian opposition group of conducting biological weapons testing, it is reported, further fueling suspicions that the monkeys are being used for nefarious purposes.
Well, that makes me feel all warm and fuzzy.
Saturday, July 12, 2008
Picked up a Remington 870
I traded off a Mini-14GB which didn't meet my reliability requirements, and got the 870 (plus some store credit). It has a 20" barrel, wood butt with recoil pad, wood corn cob forend, and a 20" barrel with rifle sights. It has the regular 4 round mag, no extension.
The bluing has some dings and marks. There are a few dings on the wood but not too much. I field stripped tonight and it was very clean on the inside with only a few wear marks.
According to Remington it was made around 1951, based on the serial number. This is a very early 870. I don't believe that 20" rifle sighted barrels were available then, so it's probably not the original barrel.
There are a couple of pics of the gun here.
Today, I installed a Fortman's left handed safety conversion. This took about 10 minutes, including getting out my set of gunsmith's punches. I still prefer my Mossberg's tang safety but this makes the Remington a lot more user friendly for me. The only other accessories I'm planning are a butt cuff or side saddle for extra ammo, and a sling. I considering maybe getting a magazine extension, since the gun hold only 4 rounds in the magazine. I may hold off on that and get a longer sporting barrel instead. In any event, I'm going to shoot it before I add anything else.
Along with the LH safety from MidwayUSA, I got a five boxes of Federal 2-3/4" low recoil 00 buckshot, and two boxes of the low recoil Tru-Ball slugs. The latter worked very well in my Mossberg Mariner, and I expect even better results in the Remington, with its rifle sights.
Friday, July 11, 2008
Monday, July 07, 2008
Mossberg Loc-Box Review
I ordered a Loc-Box directly from Mossberg. It consists of two primary parts: the Loc-Box itself and a hook that goes into the muzzle of the gun.
Here's a pic of the main unit, with my shotgun in it:
The main reason for the hook is to stabilize the gun. The locking part of the unit is what secures it. Here's a pic of the muzzle:
Per the instructions, you are supposed to mount both parts to the wall by screwing them into a stud. Mossberg supplies three long wood screws for doing so. I did it slightly differently, attaching them to pieces of wood which are attached to the wall; one piece of wood was already in my closet, while the one for the muzzle hook is a scrap I attached to the sheetrock using Gorilla Glue and 8 drywall screws.
To use the Loc-Box, you unlock and open it. Then, slide the gun's muzzle up onto the hook, and then hang it on the hook through the open ejection port (the gun's action has to be open to put it in the Loc-Box). Then close and lock the unit. Here is a pic of the unit unlocked and open. You can see the hanging hook in the middle.
By hanging the gun on a hook through the open ejection port, there is no way to bring the gun into battery with the gun in the lock. Also, nothing goes inside the trigger guard. I specifically did not want a trigger lock because they can cause accidental discharges with loaded firearms.
As you may be able to tell, the hook that you hang the gun upon, and also the muzzle hook, are vinyl coated to protect your gun from scratches. The inside of the Loc-Box is padded, but the inside lip on the right is not. I covered the lip with electrical tape to prevent my shotgun from getting scratched.
The Loc-Box comes with two keys. I have one on a keychain on a hook hidden in the closet, with the other on the keychain I keep in my pocket. I can see fumbling for the keys in an emergency, especially in the dark, so I'll probably unlock the unit at night, then lock it in the morning. As shown in the picture, the Mossberg Mariner has the safety on, action open, one round of Remington OO buckshot on the carrier, and four in the magazine. A full reload rides in an Allen butt cuff.
Cost with shipping from Mossberg was around $40, which I consider reasonable. I do not believe that this will stop a determined thief. However, for those of you who need a device to secure a shotgun against curious children*, this is a good option. Aside from Mossberg's own shotguns, it will fit a Remington 870, and probably most other slide action gun, and many autos as well.
* I have two small children. I am firm believer in gun-proofing kids, rather than trying to child-proof guns. They know to not touch my guns without me there. But until they are older I wanted a second line of defense against curious hands.
Mossberg 500 Mariner Range Report
The gun has an 18.5" cylinder bore barrel and a capacity of 5+1. It's bone stock except for a Limbsaver recoil pad, a sling in QD Uncle Mike's swivels, and an Allen elastic butt cuff for spare ammo. The sling will be coming off once it's put into the Mossberg Loc-Box that I bought for keeping the gun in my closet; I don't want it hanging up on anything in the house.
I shot it at ~10 yards and 25 yards with three kinds of ammo, all 12 gauge 2-3/4" shells:
- Remington Express OO buck
- Winchester Ranger low recoil OO buck
- Federal low recoil Tru-Ball slugs
At 10 yards, the Remington buck stayed on a 9" paper plate. At 25 yards the pattern opened up significantly, but enough to put most of the load into an aggressor's chest. The Winchester Ranger buckshot did not pattern as well as the Remington. It would be interesting to see how each load would do through a choked barrel.
I had wanted to try Federal low recoil OO buck with Flite-Control wads, but the online vendors I checked with were all out of stock. I hope to pick up some and give them a try in the future. Another buckshot load that I think will be worth trying will be Remington's reduced recoil OO buck loaded with 8 pellets, vs. the standard 9 pellet loading.
I was very impressed with the Tru-Ball slugs. They recoiled noticeably less than even the Winchester low recoil buckshot, and seemed pretty accurate. My Mossberg has only a bead front sight but it was easy to keep all my shots on a paper plate at 25 yards with the slugs. I have no doubt that they would group much better if the gun had rifle sights. However, since my intended use for it is home defense at across-the-room range, I am planning to keep the factory bead sight.
The Mossberg had no malfunctions. The first round of Winchester buckshot which I fired required an extra strong tug on the forearm to eject it, but that's an ammo issue, not a gun issue, IMO. Follow rounds of Winchester also exhibited sticky extraction, though not quite as bad. Aside from that, the gun ran well and has a smooth action. I was able to rapidly put lead on target out at 25 yards, which serves my purpose and then some. I would not hesitate to grab it if I needed to go into harm's way.
The Limbsaver recoil pad works well. Compared with other 12 bore guns with recoil pads that I've fired, the Limbsaver is much more effective in taking the sting out. That is not to say the gun is a powder puff. About 30 rounds was all I could comfortably handle before the recoil started bothering me. Between my friends and I, we put about 60 rounds through the gun today.
In summary:
I'm dissappointed with the Winchester Ranger low recoil buck, so I'm glad I bought only 25 rounds of it. The 3 remaining boxes of Winchester buckshot will be used for practice only. (Note that this load may run fine and pattern well in your gun. Try it in your gun before writing it off.)
I am very pleased with the Mossberg 500 Mariner shotgun, the Limbsaver recoil pad, Remington buckshot and Federal Tru-Ball low recoil slugs. I'm looking forward to more trigger time with the Mossberg.
Tuesday, June 24, 2008
New Mossberg 500 Mariner Shotgun
After several years without firing a shotgun, last year I picked up a Stoeger Uplander 20 gauge double. Intended usage was sporting and home defense. After shooting it I liked it but decided I wanted a gun that ejected empty cases if I was going to rely on it for defense. Yes, I could learn to work with extractors but I want to eliminate ejection as one more factor to worry about if I have to use the gun to defend my home and family. One less thing to worry about.
Since I like double guns I looked around for a coach gun with ejectors. No dice. Since the target market for coach guns is CAS, and that requires extractors, all the new coach guns come with extractors. Phooey.
That left me looking at autos and pumps. I didn't want an auto. A pump will function with pretty much any ammo. There are reliable autos but I have more confidence in the reliability of a pump. YMMV.
Currently, there are two major pump guns on the market, the Remington 870 and the Mossberg 500/590. For me the Mossberg has one feature which makes it more desireable: the top mounted tang safety. I am left handed and the Remington's cross-bolt safety (unless I found a southpaw 870) works backwards. Yes, I can learn to work with one but why complicate matters, if a suitable alternative exists?
The Dick's Sporting Goods near me had a couple of suitable choices. The first that I looked at was a 20 gauge Mossberg 500 Super Bantam All Purpose Field. This is a blued gun with a 22" barrel, recoil pad, and removable stock spacer. I really liked the idea of the short length of pull. The Super Bantam fit me pretty well but it was [I]light[/I]. Only 5-1/4 pounds according to Mossberg's web page. That would make a great gun for carrying but recoil with it is going to be [B]stiff[/B], even in 20 gauge.
Next up was a Mossberg 500 Mariner in 12 gauge with an 18.5" cylinder bore barrel with a bead. The metal has Mossberg's MarineCoat finish, which looks like electroless nickel (not sure if it's that or something more high speed). I like the idea of a finish which reduces the amount of maintenance I need to perform. It's not pretty like bluing but this is a tool. Also, the flat silver finish probably makes the gun look a bit bigger and scarier, which is a bonus if I ever need to unlimber it for defense. (I regard this as a [I]bonus[/I], not as something to be relied on.) Like the Super Bantam it came with black plastic furniture, though it lacks the removable spacer to adjust LOP. It does have a recoil pad. Weight is 7 pounds. It fit me pretty well, the price seemed reasonable at $369, so I decided to buy it.
Along with the gun I bought a 100 round value pack of Remington #8 target loads, just to get familiar with the gun. I'm going to pick up some reduced recoil buckshot and slugs for serious work. Aside from ammo, the only accessories this gun will get are a shell holder for the butt stock (already on though not shown in the pic below), a sling in QD swivels, for outside use, and a Mossberg Loc-Box so I can safely store it in my bedroom. I also picked up a 12 gauge Hoppe's BoreSnake.
Depending on how well I can shoot slugs in it, the Mariner might even see duty for deer hunting.
After getting it home I field stripped the Mossberg and lightly oiled it with Ballistol, and removed the plug so I can fill the 5 round mag. I BoreSnaked the barrel which showed signs of being proof fired and not cleaned thereafter.
My next step is to BA/UU/R.
Obligatory new gun pics here.
Wednesday, June 11, 2008
Disaster Recovery Trial Run
Check it out.
Thursday, April 24, 2008
Ordered Some Mylar Bags
I ordered the bags and O2 absorbers from Sorbent Systems. They have a page here which shows how to seal the bags using a regular iron, for those of us without commercial grade sealers.
Tuesday, April 22, 2008
Load Up The Pantry
Load Up the Pantry
April 21, 2008 6:47 p.m.I don't want to alarm anybody, but maybe it's time for Americans to start stockpiling food.
No, this is not a drill.
You've seen the TV footage of food riots in parts of the developing world. Yes, they're a long way away from the U.S. But most foodstuffs operate in a global market. When the cost of wheat soars in Asia, it will do the same here.
Reality: Food prices are already rising here much faster than the returns you are likely to get from keeping your money in a bank or money-market fund. And there are very good reasons to believe prices on the shelves are about to start rising a lot faster.
Full article here.
I am currently looking into getting setup to seal bulk purchases into mylar bags with oxygen absorbers, so they don't spoil before we use them. I'll be posting about that. In the meantime, another good read is this food storage FAQ.Monday, April 21, 2008
Food Rationing Hitting the US?
Now comes this story:
Full story here.Major retailers in New York, in areas of New England, and on the West Coast are limiting purchases of flour, rice, and cooking oil as demand outstrips supply. There are also anecdotal reports that some consumers are hoarding grain stocks.
At a Costco Warehouse in Mountain View, Calif., yesterday, shoppers grew frustrated and occasionally uttered expletives as they searched in vain for the large sacks of rice they usually buy.
After reading the story above, I took a trip over to our local BJ's Wholesale Club (similar to Costco). There seemed to be no shortage at this particular store, but while I was there I figured it would be a good idea to pick up a couple bags of rice, along with some other staples.
No reason to panic yet, but this bears watching.
Friday, April 18, 2008
Yaesu Update
Tuesday, April 08, 2008
Spyderco Sharpmaker and Gerber Diamond Pocket Sharpener
Last weekend I asked my father to bring over his Spyderco Sharpmaker for me to try. I used it to touch up a couple of blades and was impressed with how easy and fast it was to get a good edge. So, Sunday night I ordered one from Knifecenter.com. While I was on their site I also ordered a Gerber Diamond Pocket Sharpener. UPS dropped them off today.
Before using the Spyderco I read the included written instructions and viewed the instructional DVD.
The Sharpmaker consists of a base, a set of medium grit ceramic rods, a set of fine grit ceramic rods, and two brass rods to act as handguards. When assembled the ceramic rods are set to give you a selectable edge angle of either 30 or 40 degrees. (See a picture here.) You hold the blade vertically and move it against the rods.
After dinner, I used it to sharpen several of my knives: a Case Moose with chrome vanadium blades, an Ontario RAT-3 with a 1095 carbon steel blade, a Benchmade Griptilian with a 440C stainless blade, a Schrade LB7 Bearpaw with a stainless blade, and a Mora Swedish Army Knife with a stainless blade. None of these knives were dull to start with, but now they're sharp. I had especially good results with the RAT-3, the clip blade on the Moose, and the Griptilian, all of which are now like razors (and I have the bald spots on my forearm to prove it).
I am impressed with not only the ease of using the Sharpmaker, but also with the speed one can put a sharp edge on a knife with it. Also, as shown in the video, the tool can be used to sharpen other implements like axes, serrated blades, and even scissors.
It's much easier to keep the blade vertical and move it against an angled surface, than it is to keep the blade at a constant angle and move it against a horizontal stone. This is a large part of why the Sharpmaker works so well.
The Gerber Sharpener consists of two sets of diamond grit coated rods, one fine and one coarse, in a plastic handle. You place the blade in the "V" between the rods and draw it through. It works fine for quicky sharpening jobs in the field. I used the fine rods to touch up the large blade on my Victorinox Explorer SAK, and it worked well.
Freehand sharpening with a stone remains a valuable skill. However, for routine sharpening of most knives, I'm going to use the Sharpmaker because I get better results with it than anything else I've tried. The Gerber sharpener will go into my possibles bag after I add a lanyard of some bright yellow string, to help me find it if I drop it. It weighs almost nothing and will serve to put a usable edge on a knife if it gets dull in the field.
Remember, dull knives are dangerous. They require you to exert more effort to cut something, which increases the likelihood you'll slip and cut yourself. Sharp knives are much safer. The Spyderco and Gerber are good tools to help you keep your knives sharp.
Sunday, April 06, 2008
Some Lessons Learned From Paintball
In no particular order:
1. People hide behind things when you shoot at them. If this was a real firefight, I'd want a round that offers good penetration. E.g., 7.62x39 or 7.62 NATO. I've witnessed multiple 5.56x45 bullets get stopped cold by a sapling which was maybe 3" in diameter. For home defense this may be an advantage. For combat, give me something that will turn cover into concealment.
2. Peering out from concealment is frequently enough to get you shot in the head. I think I got hit in the face/head 3 or 4 times yesterday.
2(a) Frequently, the only shot you may get on an opponent is of a head or other body part sticking out. For anything further than 20 yards, you're going to want a rifle, unless you have a shotgun with slugs and you can shoot it as well as a rifle. I hope to have a rifle if I ever get in a firefight.
3. Even when behind cover or concealment, frequently you will get shot by someone you didn't know was around.
4. That said, it's safer to stay hidden than to try closing with your enemy. Let him come to you and you'll survive longer.
5. When operating in thick woods or a built up area, there may be 40 people within an acre or two, and you may still not see anybody, friend or foe. The same applies if it isn't a paintball game. Some kind of short range radios for tactical commo would be *very* valuable.
6. Gloves are good. They allow you to drop to the ground without scraping your hands and provide limited protection against glancing blows. I wore Mechanix brand mechanic's gloves, which are thin enough to allow you to be reasonably dextrous. I wore these gloves in a practical carbine match back in December and they worked well for real shooting (I won the iron sight class, AAMOF). I got them at Lowe's.
7. Well-aimed suppressive fire can keep your opponent pinned down so he can't shoot you or your buddy. This is NOT "spray and pray." Rather, if you see an enemy behind cover, you can put rounds close to him, which will prevent him from poking out at you. Obviously, civilians don't usually have the luxury of using suppressive fire in defensive situations, since we need to be careful about not shooting innocent bystanders. Unfortunately, your opponent may not care. Keep this in mind so you can adapt your tactics to fit the situation.
8. Plain black iron sights won't be easy to see in the woods or inside a dimly lit building, especially when it's overcast or near dawn or dusk. At a minimum, your front sight should have a white or orange insert or paint. A (real) gold or ivory bead, or fiber optic front sight will be much better. A red dot sight is better yet. Fiber optic sight inserts and illuminated optics are two of the best innovations in the gun world ever, IMHO.
9. Even though I wasn't in any kind of danger, this kind of exercise made my adrenalin level skyrocket. Unless you are the kind of person who's unfazed by anything, expect your heart to be pounding. This is less of a factor if you're in good physical shape. Unfortunately, I'm a fat middle aged guy.
10. If you wear glasses or goggles, get some anti-fog coating if it's at all humid. Until I got some "Fog[Tech]" wipes from the pro shop I couldn't see much because my glasses and protective mask kept fogging up. If you can't see, you can't fight.
10(a) If you wear protective goggles, pick ones that wrap around so they don't limit your peripheral vision. The masks supplied by Skirmish USA eliminated peripheral vision, which exacerbated my inability to keep track of my surroundings. OTH, this helped simulate the tunnel vision many people report in the aftermath of a real encounter.
11. When involved in a force-on-force encounter (real or simulated), getting shot is a very real possibility. There's a good chance you won't even see who shoots you. Unlike the movies where the hero gets shot in the arm but goes on to prevail, expect to get shot in the hands, arms, face, head, chest, back, butt, and groin.
11(a). Yes, I got hit a two or three times in the crotch. Thankfully, I was wearing my spare ammo carrier so that it covered up my boys, so it didn't hurt. If you decide to practice force-on-force with airsoft or paintball, wear protection down there.
12. "Too much ammo" is an oxymoron.
Thursday, April 03, 2008
Listening to Katrina
Pics of my New Yaesu FT-7800R Installation
First, the control head mounted on the center console, mic, and Radio Shack speaker:
The body of the radio is mounted under the passenger side front seat. Front:
Back:
No antenna pics. I'm using a Diamond MR-77 mag mount, which I've had for awhile and used when I had my VX-5RS in the truck. It works great and allows me to tip it over in case I need to park in a garage. I've only used the new setup briefly but I've already received traffic on repeaters up to 50 miles away. Compared with the VX-5RS, this is going to give me greatly improved mobile communications capability.
I had Automotive Sound and Protection in Conshohocken, PA do the install. Cost was $80.